Specialty Equipment Installation Report: Rollem International’s Semi-Slitter Kiss Cutting System Automates Slitting for Sign and Decal Companies
- Published: November 30, 2022
The Semi-Slitter is the industry standard for partial slitting of PSA liner stocks or face slitting of pressure sensitive products. These machines can be found in many screen printing, graphics, and industrial print shops. The following companies utilize Semi-Slitting systems to improve the accuracy of their PSA slitting processes while also increasing production turn-around times:
Identity Group, Brunswick, ME installed a 24” Semi-Slitter
Traffic Safety Supply Company, Portland, OR installed a 30” model
Decalcorama Inc. of Quebec Canada installed a 36” model
Allied Graphics of St. Michael, NM installed a 42” model.
Manufactured in Sheffield, UK, a key design feature is the 2.5” hardened concentric roller which stabilizes and supports the cutting tools along the width of any sheet. This positive control eliminates high and low cutting points ensuring precision and consistent depth of cuts, sheet after sheet. Production is greatly increased with the ability to add multiple slitting heads on the roller.
These companies can slit any material from fine paper stocks to heavy gauge plastics, with the same accuracy sheet after sheet. With a margin of accuracy within 1/10,000th of an inch and speeds up to 26,000 sheets per hour, the SS guarantees higher profits on all PSA partial slitting needs.
For more information, visit www.rollemusa.com/ss.
