Trim Removal

Who's Driving This Nip

(Web Lines)

November 30, 2008, ... speed change is easily handled within a standard tension trimming. But if this roller is operating in speed ratio control or is the pacer of your process, a half-percent speed change is likely a big deal. ...

New Film Line Easy To Manage

(Substrates)

November 30, 2008, Coldwater, OH | Accutech Films recently purchased a seven-layer line from Gloucester Engineering Co. The line adds to Accutech's coextrusion and specialty Coldwater, OH | Accutech Films recently purchased ...

Narrow Web and Label Report, November 2008

(Narrow Web)

October 31, 2008, Mark Andy, St. Louis, MO, is acquired by newly formed MAI Holdings, held by American Industrial Partners Capital Fund IV L.P. The management and operational Mark Andy, St. Louis, MO, is acquired by newly ...

Web Coating: Process Characterization

(Coating/Laminating)

October 31, 2008, The web coating process has about 15 major components, and each of these components, in turn, has many hardware subsystems. All these hardware subsystems The web coating process has about 15 major components, ...

Lab/Pilot/Technical Facilities Directory

(Archive)

October 31, 2008, ... edge trim removal system, and a venturi-based system that can be tested with static controls and either a cyclone or company's slant screen separator on back end. Also: WastePAC Densifier and repelletizing ...

KBA, FLEXcon Premiering Unique Substrates at Graph Expo

(News | New Products)

October 13, 2008, KBA North America, a global press manufacturer, has collaborated with FLEXcon Co., global manufacturer of p-s film products located in Spencer, MA, to premiere three new and unique substrates for the KBA ...

POLAR receives 2008 PIA/GATF InterTechTechnology Award

(News | New Products)

October 09, 2008, ...  Using the Autoturn turning gripper, the PACE system positions reams on the rear table and aligns them, which makes it capable of performing a four-side trim fully-automatically. The removal of cutting ...

Door to Door QC

(Coating/Laminating)

September 30, 2008, Although Jessup Mfg. Co. defines itself as a global manufacturer and supplier of pressure-sensitive films that improve safety and productivity, Rob Jessup, Although Jessup Mfg. Co. defines itself as a ...

UV/EB Inks Are Suitable for Laminated Structures

(Inks/Coatings/Primers)

September 30, 2008, ... Trimethylolpropane Triacrylate Polyester Acrylate 10.0 Pigment wetting Ciba Irgacure 369 3.5 2-Benzyl-2-(dimethylamino)-1-[4-(4-morpholinyl)phenyl]-1-butanone Lamberti Esacure KS300 3.0 ...

Label Materials Prevent Fraud

(News Eclips)

September 17, 2008, 3M introduces Tamper-Evident Label Materials in permanent and non-permanent markings ST. PAUL, MN | 3M introduces Tamper-Evident Label Materials in permanent and non-permanent markings. New 76901 uses ...

Cleaning at the Cutting Edge

(News | New Products)

August 17, 2008, Teknek contact cleaners are said to differ from other methods of web cleaning in the their effectiveness RENFREWSHIRE, UK | Teknek contact cleaners are said to differ from other methods of web cleaning ...

Stork Prints Group Debuts Digital System, Engraver at Drupa

(News | New Products)

August 06, 2008, The Stork Prints Group, a leader in rotary screen printing systems and consumable products, unveiled its first drop-on-demand inkjet system for narrow-web applications at Drupa 2008 BOXMEER, Netherlands ...

Dirge for a Plastic Bag?

(Editorial)

July 31, 2008, ... all the steps necessary to reduce those items, elements, and other things that are deemed to be detrimental to man and beast, but believe we need to be reasonable and logical in our efforts and make meaningful ...

Web Exclusive: Are Sleeves Ready for Narrow Web?

(Archive)

July 31, 2008, While the number of machines with sleeve technology is growing in label printing, many users still are hesitant about using them. Sleeves became a standard on flexographic presses for package printing ...

Carton & Box Reporter

(Carton Box)

May 31, 2008, Plasma Technology Agreement Reported ROSELAND, NJ The Bobst Group has entered an agreement with Plasmatreat GmbH, Steinhagen, Germany, to be the exclusive Plasma Technology Agreement Reported ROSELAND, ...

What's New Product

(New Products)

May 31, 2008, ... curing, and system often can eliminate potential “shadowed areas” around components that are detrimental to a light curing process. Dymax Corp. | 860-482-1010 | www.dymax.com PFFC-ASAP 405 UV Systems ...

Drupa New Product Digest

(Magazine)

April 30, 2008, Training Simulators Offered Press training products and services include sheet-fed simulators with new color control tools; packaging gravure simulators; Training Simulators Offered Press training products ...

Drupa Tour Covers Digital, Color & Proofing

(News | New Products)

April 09, 2008, ... will run at 135 A4 pages/min and will feature finishing and output options including booklet trimmer, paper folder, saddle stitcher, high-capacity stacker, professional puncher, and document inserter. ...

Your Guide to the Right Web Guide

(Archive)

March 31, 2008, ... is placed on the unwind chuck or shaft. After hitting the first roller, the left-right tolerance of web position may get more challenging. Does the web align to the coating head? To trim knives? To the ...

Drupa Tour Explores Inkjet and Toner Technologies

(News | New Products)

March 27, 2008, MORTSEL, BELGIUM, March 21 | Day Two of Duomedia’s Drupa Discovery Tour began at Agfa Graphics. President Stefaan Vanhooren reported parent company Agfa-Gevaert will de-merge MORTSEL, BELGIUM, March 21 ...

EskoArtwork Kicks Off Drupa Discovery Tour

(News | New Products)

March 26, 2008, GENT, BELGIUM (March 20) | On Day One of Duomedia’s Drupa Discovery Tour, 83 journalists gathered from 26 countries GENT, BELGIUM (March 20) | On Day One of Duomedia’s Drupa Discovery Tour, 83 journalists ...

Steam Joint

(Archive)

March 02, 2008, The next generation steam joint for corrugating applications from Deublin is engineered to improve product quality while reducing maintenance costs. ST-LAURENT, QUEBEC, CANADA | The next generation steam ...

TOP 10 EClips PFFC's electronics clipping service for converter

(New Products)

February 29, 2008, ... laminate up to six layers of melt-blown nonwoven, edge trim, and rewind the laminated filter material to maximum 700 mm dia roll. Six-station unwind section accommodates rolls 270-650 mm wide × 600 mm ...

What's New Product

(New Products)

February 29, 2008, Rolls Feature Tough Screen Isoten vacuum rolls feature a durable steel screen that distributes vacuum suction evenly across the roll face. Company says Rolls Feature Tough Screen Isoten vacuum rolls feature ...

March Narrow Web & Label Reporter

(Narrow Web)

February 29, 2008, Automatic Converting System System gelb has a cantilevered design said to make it ideal for converting labels, embossing, and RFID. The six-stage production Automatic Converting System System gelb has ...

Drupa Answers Slitting Needs

(News | New Products)

February 05, 2008, Drupa, the quadrennial printing event held in Dusseldorf, Germany, moves ever closer to its much anticipated opening on May 29 Drupa, the quadrennial printing event held in Dusseldorf, Germany, moves ever ...

Folding Technique Training

(News | New Products)

January 31, 2008, ... fold roller and buckle plate settings, scoring, perforating and trimming. Advanced Folding Techniques are scheduled for February 11-12 and February 14-15, covering folding techniques, specialty folds, ...

How To Find Information Fast

(Editorial)

January 31, 2008, ...  new look. It was designed to allow quick access to information. We know that any number of management techniques implemented properly, including lean initiatives, have helped many converters trim cost ...

Process Management: Drying Part 1: Liquid Inks

(Magazine)

January 31, 2008, In the next three columns, we will cover the basic mechanisms of ink drying. This month we look at inks drying primarily by evaporation and absorption In the next three columns, we will cover the basic ...

Property Control

(Coating/Laminating)

January 31, 2008, Coater operability and the applicator's ability to apply coating uniformly as well as physical defects and final coating quality all depend upon the properties Coater operability and the applicator's ability ...